Contact us to purchase these professionally manufactured metal and plastic letter, logo, and graphics products.
Take a look at their catalog, or download, by clicking below.
Heiden’s, a food processing company in Anaheim, in Orange County, California got a new building sign this week, branding their new facility. The sign is 7 ft. X 6 ft. dimensional wall sign with 3 in deep foam backing on black acrylic.
This sign was created in several sections with final assembly on site.
The foam backing was laser cut with holes for the studs that were mounted to the wall. The paper template created from the laser-cutting pattern had those holes marked in pen — I just drilled the wall and set the studs in epoxy. The pieces were then installed with silicon for a permanent hold. The sections fit easily and perfectly over the studs, so that everything lined up as one piece.
The logo lent itself to cutting into sections, with the gold lines as the dividing point, so that the visual effect would make it look like one piece. In addition, the lettering and gold lion parts were laser cut using the same pattern and applied over the pieces to add more camouflage to the fact that the logo was actually done in sections.
So, here’s the final result — a great looking building logo, and another happy client.
This project was created to satisfy multiple goals: project branding, parking and other traffic control, and tenant identification. This project was just completed, a real improvement for the property. As some existing tenants move out, their old monument panels will be exchanged for new. Here are the results: